Tip 1: Always have your lifting equipment inspected in time.
In the first place, inspecting and testing the lifting equipment is an important aspect that guarantees safety. An expert checks the lifting equipment inside and out and tests if necessary. The results are used to assess whether the lifting equipment can be used safely, or whether maintenance and repairs are disapproved. In case of disapproved lifting equipment, the lifting equipment must be taken out of use. But how often is it necessary to inspect lifting equipment? It is legally required to have an inspection carried out at least once a year by an expert inspector who has the necessary professional knowledge and certifications. In case of disapproval, you can go to the Liftinggear shop for all your new deliveries of lifting and hoisting equipment!
Tip 2: Daily inspection helps prevent serious defects.
In addition to the annual inspection, it is important to always check the lifting gear before use. The prevention of serious defects starts with early identification. Points that you have to check before use can differ per lifting device. Therefore, always refer to the manual for specific information. In the first place, it is significant that a label is present with clearly visible information. This must show the maximum workload and the current inspection date. The surface of the hoisting or lifting equipment must not contain any cracks or deformations, and all pivot points present must be able to move smoothly. The lifting equipment must also be taken out of use if there are traces of corrosion or wear. Make sure that it is also clearly visible that the lifting equipment may no longer be used.
Tip 3: Use oil to maintain flexibility.
When you are dealing with chains or rotating parts in the lifting equipment, it is important to maintain these flexible and clean. In case of dirt or dust, the surface of the steel should be cleaned with a slightly oiled cloth. When you are going to carry out maintenance on a hoisting equipment, we always advise against hanging the hoisting equipment in the crane. It is better to carry out maintenance on a clean and stable surface.
Tip 4: Store your lifting and hoisting equipment properly.
To prevent unwanted influences from dirt, temperature, or UV light, it is important that the lifting equipment is properly stored. A storage box offers a good solution. The Liftinggear shop boxes are available in various sizes, all with three handles and one lock. The convenience of these storage boxes is that you can easily move lifting equipment using the wheels under the boxes.
Tip 5: Have a repair carried out by an expert.
When repairs are made to a lifting device, it is possible that the certification will be canceled. We therefore recommend that you have repairs carried out by a certified inspector. The inspector can immediately carry out an inspection and adjust the certificate of the lifting equipment to the renewed inspection date. That way, the certification of your lifting equipment is up-to-date again!
